As robotics advances toward integrating soft structures, anthropomorphic shapes, and complex tasks, soft and highly stretchable mechanotransducers are becoming essential. To reliably measure tactile and proprioceptive data while ensuring shape conformability, stretchability, and adaptability, researchers have explored diverse transduction principles alongside scalable and versatile manufacturing techniques. Nonetheless, many current methods for stretchable sensors are designed to produce a single sensor configuration, thereby limiting design flexibility. Here, we present an accessible, flexible, printing-based fabrication approach for customizable, stretchable sensors. Our method employs a custom-built printhead integrated with a commercial 3D printer to enable direct ink writing (DIW) of conductive ink onto cured silicone substrates. A layer-wise fabrication process, facilitated by stackable trays, allows for the deposition of multiple liquid conductive ink layers within a silicone matrix. To demonstrate the method's capacity for high design flexibility, we fabricate and evaluate both capacitive and resistive strain sensor morphologies. Experimental characterization showed that the capacitive strain sensor possesses high linearity (R^2 = 0.99), high sensitivity near the 1.0 theoretical limit (GF = 0.95), minimal hysteresis (DH = 1.36%), and large stretchability (550%), comparable to state-of-the-art stretchable strain sensors reported in the literature.

Soft robotic fingers can improve adaptability in grasping and manipulation, compensating for geometric variation in object or environmental contact, but today lack force capacity and fine dexterity. Integrated tactile sensors can provide grasp and task information which can improve dexterity,but should ideally not require object-specific training. The total force vector exerted by a finger provides general information to the internal grasp forces (e.g. for grasp stability) and, when summed over fingers, an estimate of the external force acting on the grasped object (e.g. for task-level control). In this study, we investigate the efficacy of estimating finger force from integrated soft sensors and use it to estimate contact states. We use a neural network for force regression, collecting labelled data with a force/torque sensor and a range of test objects. Subsequently, we apply this model in a plug-in task scenario and demonstrate its validity in estimating contact states.

Abstract-- A tensegrity-based system is a promising approach for dynamic exploration of uneven and unpredictable environments, particularly, space exploration. However, implementing such systems presents challenges in terms of intelligent aspects: state recognition, wireless monitoring, human interaction, and smart analyzing and advising function. Here, we introduce a 6-strut tensegrity integrate with 24 multimodal strain sensors by leveraging both deep learning model and large language models to realize smart tensegrity. Using conductive flexible tendons assisted by long short-term memory model, the tensegrity achieves the self-shape reconstruction without extern sensors. Finally, human interaction system of the tensegrity helps human obtain necessary information of tensegrity from the aspect of human language. The concept of using tensegrity structures in space exploration is an innovative approach that offers several advantages due to the unique properties of tensegrity systems. One famous example is the "Super Ball Bot" developed by NASA (National Aeronautics and Space Administration) [1][2]. Tensegrity structures are composed of solid compression components (rods/struts) connected by tension elements (cables/strings).

Textile sensors transform our everyday clothing into a means to track movement and bio-signals in a completely unobtrusive way. One major hindrance to the adoption of "smart" clothing is the difficulty encountered with connections and space when scaling up the number of sensors. There is a lack of research addressing a key limitation in wearable electronics: connections between rigid and textile elements are often unreliable and they require interfacing sensors in a way incompatible with textile mass production methods. We introduce a prototype garment, compact readout circuit, and algorithm to measure localized strain along multiple regions of a fibre. We employ a helical auxetic yarn sensor with tunable sensitivity along its length to selectively respond to strain signals. We demonstrate distributed sensing in clothing, monitoring arm joint angles from a single continuous fibre. Compared to optical motion capture, we achieve around 5{\deg} error in reconstructing shoulder, elbow, and wrist joint angles.

Knitted sensors frequently suffer from inconsistencies due to innate effects such as offset, relaxation, and drift. These properties, in combination, make it challenging to reliably map from sensor data to physical actuation. In this paper, we demonstrate a method for counteracting this by applying processing using a minimal artificial neural network (ANN) in combination with straightforward pre-processing. We apply a number of exponential smoothing filters on a re-sampled sensor signal, to produce features that preserve different levels of historical sensor data and, in combination, represent an adequate state of previous sensor actuation. By training a three-layer ANN with a total of 8 neurons, we manage to significantly improve the mapping between sensor reading and actuation force. Our findings also show that our technique translates to sensors of reasonably different composition in terms of material and structure, and it can furthermore be applied to related physical features such as strain.

Developing soft robots that can control their own life-cycle and degrade on-demand while maintaining hyper-elasticity is a significant research challenge. On-demand degradable soft robots, which conserve their original functionality during operation and rapidly degrade under specific external stimulation, present the opportunity to self-direct the disappearance of temporary robots. This study proposes soft robots and materials that exhibit excellent mechanical stretchability and can degrade under ultraviolet (UV) light by mixing a fluoride-generating diphenyliodonium hexafluorophosphate (DPI-HFP) with a silicone resin. Spectroscopic analysis revealed the mechanism of Si-O-Si backbone cleavage using fluoride ion (F-), which was generated from UV exposed DPI-HFP. Furthermore, photo-differential scanning calorimetry (DSC) based thermal analysis indicated increased decomposition kinetics at increased temperatures. Additionally, we demonstrated a robotics application of this composite by fabricating a gaiting robot. The integration of soft electronics, including strain sensors, temperature sensors, and photodetectors, expanded the robotic functionalities. This study provides a simple yet novel strategy for designing lifecycle mimicking soft robotics that can be applied to reduce soft robotics waste, explore hazardous areas where retrieval of robots is impossible, and ensure hardware security with on-demand destructive material platforms.

Newly engineered slinky-like strain sensors for textiles and soft robotic systems survive the washing machine, cars and hammers. Think about your favorite t-shirt, the one you've worn a hundred times, and all the abuse you've put it through. You've washed it more times than you can remember, spilled on it, stretched it, crumbled it up, maybe even singed it leaning over the stove once. We put our clothes through a lot and if the smart textiles of the future are going to survive all that we throw at them, their components are going to need to be resilient. Now, researchers from the Harvard John A. Paulson School of Engineering and Applied Sciences (SEAS) and the Wyss Institute for Biologically Inspired Engineering have developed an ultra-sensitive, seriously resilient strain sensor that can be embedded in textiles and soft robotic systems. The research is published in Nature.

An increasing amount of civil engineering applications are utilising data acquired from infrastructure instrumented with sensing devices. This data has an important role in monitoring the response of these structures to excitation, and evaluating structural health. In this paper we seek to monitor pedestrian-events (such as a person walking) on a footbridge using strain and acceleration data. The rate of this data acquisition and the number of sensing devices make the storage and analysis of this data a computational challenge. We introduce a streaming method to compress the sensor data, whilst preserving key patterns and features (unique to different sensor types) corresponding to pedestrian-events. Numerical demonstrations of the methodology on data obtained from strain sensors and accelerometers on the pedestrian footbridge are provided to show the trade-off between compression and accuracy during and in-between periods of pedestrian-events.